INSTALATION

pip install -r requirements.txt

TEST SCENARIO CONTENT

1. Login user

Scope: Test valid and invalid login attempts to the Authorization page.
Action: User submits Login form.
Test Notes and Preconditions: Open the login page.
Verification Steps: Verify the user has been entered in to the admin page after given the correct details

#	Action	Test case procedure	Expected result
1.1	User enters only login	1. Enter login	Confirm button should be disabled.
1.2	User enters only password	1. Enter password	Confirm button should be disabled.
1.3	User enters inproper values	1. Enter login="asd" 2. Enter password="asd" 3. Click Confirm	A red toast message should appear.
1.4	User enters proper values	1. Enter login="admin" 2. Enter password="Admin" 3. Click Confirm	A green toast message should appear and user should be logged in. Url should be on modules.
1.5	User clicks Barcode and Confirm after entering invalid credentials	1. Press Barcode 2. Enter any invalid credentials 3. Press Confirm	User should remain on the authorization page not be logged in and toast message should appear.
1.6	User clicks Barcode and Confirm after entering valid credentials	1. Press Barcode 2. Enter valid credentials: "AdminBC" 3. Press Confirm	User should be logged in and toast message should appear.
1.7	User clicks Barcode and Confirm after entering very long hence invalid credentials	1. Press Barcode 2. Enter very long Barcode 3. Click Confirm button	User should remain on the authorization page not be logged in and toast message should appear.
1.8	User clicks Confirm after entering very long hence invalid credentials	1. Enter very long Username 2. Enter very long Password 3. Click Confirm button	User should remain on the authorization page, not be logged in and toast message should appear.

2. Logout user

Scope: Test logout user after successful login.
Action: User logs out.
Test Notes and Preconditions: Perform test after login.
Verification Steps: Verify the user has been successfully logout after clicking on the action in menu.

#	Action	Test case procedure	Expected result
2.1	User clicks log out	1. Open user menu 2. Press Logout	User should be logged out, toast message should appear and user should be redirected to authorization page.
2.2	User clicks back after logout	1. Open user menu 2. Press Logout 3. Press Back button	User should remain on the authorization page.
2.3	User logs in after logout	1. Open user menu 2. Press Logout 3. Log in	User should be able to log in.

3. Change user

Scope: Change user after successful login.
Action: Change user (logout the old one and log in a new one).
Test Notes and Preconditions: Perform test after login.
Verification Steps: Verify the user has been successfully changed after clicking on the action in menu.

#	Action	Test case procedure	Expected result
3.1	User clicks Change user	1. Open user menu 2. Press Change user	A login window should appear.
3.2	User clicks Change userand Cancel	1. Open user menu 2. Press Change user 3. Press Cancel	User should not be logged out, user should remain on the same page and name and surname should remain (top right corner).
3.3	User clicks Change userand Confirm after entering credentials	1. Open user menu 2. Press Change user 3. Enter "operBC" barcode 4. Confirm	User be logged out and the new user should be logged in, the toast message should appear and user name and surname should change.
3.4	User clicks Change userand Confirm after entering credentials	1. Open user menu 2. Press Change user 3. Enter "operBC" barcode 4. Confirm 5. Press back button	The new user should remain logged in.

4. Change language

Scope: Change language in user menu.
Action: Change language for user.
Test Notes and Preconditions: Perform test after login.
Verification Steps: Verify the language has been successfully changed after clicking on the action in menu.

#	Action	Test case procedure	Expected result
4.1	User clicks Change application language	1. Open user menu 2. Press Change application language	The change language window should appear.
4.2	User clicks Change application language and Cancel	1. Open user menu 2. Press Change application language 3. Press Cancel	Language should not be changed.
4.3	User clicks Change application language and Confirm after chosing the same one	1. Open user menu 2. Press Change application language 3. Choose the same language 4. Confirm	Application language should not change.
4.4	User clicks Change application language and Confirm after chosing new language	1. Open user menu 2. Press Change application language 3. Choose the an other language 4. Confirm	Application language should change.
4.5	After change of one user language a language of the other user should remain	1. Check language of first user 2. Change user 3. Change application language 4. Change user back	Language of the first user should remain unchanged.

5. Items

Scope: Items configuration.
Action: CRUD of items in configuration.
Test Notes and Preconditions: Perform test after login as admin.
Verification Steps: Verify the CRUD operations on items.

#	Action	Test case procedure	Expected result
5.1	Items configuration view should appear	1. Open application menu 2. Go to Configuration -> Application configuration -> Items	Items list on item configuration should appear.
5.2	Check default buttons state on items configuration	1. Go to Configuration -> Application configuration -> Items	Add button should be enabled, delete and edit buttons should be disabled.
5.3	Check buttons state after selecting an item on items configuration	1. Go to Configuration -> Application configuration -> Items 2. Select an item	Delete, Edit and Add buttons should be enabled.
5.4	Add item	1. Go to Configuration -> Application configuration -> Items 2. Add item	Added item should appear on the list.
5.5	Edit item	1. Add item 2. Edit it's name	Edited item should appear on the list. Check if the change is visible.
5.6	Remove item	1. Add item 2. Remove it	Item should not be on the list
5.7	Try to Add item with not all required fields filled	1. Open Add item window 2. Check if Save button is disabled 3. Try to fill data in several combinations and check if button behave correctly	Save button should behave correctly.
5.8	Check maximum allowed number of characters for ZFIN and Name fields	1. Add item with long name and long ZFIN	Item should be on the list.
5.9	Check ZFIN and Name fields filled with over maximum allowed number of characters	1. Add item with longer name and ZFIN than maximum allowed number of characters	Save button should behave correctly.
5.10	User fills all required fields of Add item and clicks Cancel	1. Fill all fields of Add item correctly 2. Click Cancel	Item should not appear on the list.
5.11	Abort Delete item	1. Select item from list 2. Click Delete 3. Click No when dialog appear	Item should remain on the list.

6. Process control configuration

Scope: Process control configuration.
Action: CRUD of different components of Process control configuration.
Test Notes and Preconditions: Perform test after login as admin.
Verification Steps: Verify the CRUD operations on components of Process control configuration.

#	Action	Test case procedure	Expected result
6.1	Add parameter	1. Open Parameters list 2. Press Add 3. Fill required Parameter name field 4. Click Save	Parameter should be on the list.
6.2	Delete parameter	1. Open Parameters list 2. Select parameter from the list 3. Delete selected parameter	Parameter should not be on the list.
6.3	Duplicate parameter	1. Open Parameters list 2. Select parameter from the list 3. Duplicate selected parameter	Add parameter window should appear with filled Parameter name
6.4	Check additional fields appearance for Parameter type: List selection	1. Open Parameters list 2. Press Add 3. Select Parameter type: List	List view should appear
6.5	Check List elemnts assigment after adding List element	1. Open Parameters list 2. Press Add 3. Select Parameter type: List 4. Click Add	Created element should be assigned to List elements
6.6	Check additional fields appearance for Parameter type: Integer value/Float value selection	1. Open Parameters list 2. Press Add 3. Select Parameter type: Integer value/Float value	Additional fields should appear
6.7	Check additional fields appearance for both Comment options checked	1. Open Parameters list 2. Press Add 3. Check both Comment options	Two additional fields should appear
6.8	Check Parameter required matching	1. Open Parameters list 2. Press Add 3. Check Parameter required option	Parameter required on the list should show Yes
6.9	Check assigment of Parameter to Controls Action and Controls Action to Controls	1. Add Parameter 2. Go to Controls Action 3. Add Control Action with Parameter assigned 4. Go to Controls 5. Add Control with Control Action assigned	Flawlessly perform all assignments and check added position appearance on lists

7. Tasks list

Scope: Tasks list functionality.
Action: CRUD of different tasks of Tasks list.
Test Notes and Preconditions: Perform test after login as admin.
Verification Steps: Verify the CRUD operations on tasks of Tasks list.

#	Action	Test case procedure	Expected result
7.1	Change status	1. Open Tasks list 2. Check Change status button status 3. Select Task form list 4. Change its status 5. Check if status has changed	Status of the task changed
7.2	Edit tasks Task name	1. Select task 2. Click Edit button 3. Change Task name	Task should appear on the list with changed name
7.3	Edit tasks Required quantity	1. Select task 2. Click Edit button 3. Change tasks Required quantity	Task should appear on the list with changed Required quantitiy
7.4	Edit tasks Priority	1. Select task 2. Click Edit button 3. Change tasks Priority to invalide integer value	Error message should appear under Priority field and Save button should be disabled
7.5	Checks input of Priority and Required quanitity	1. Select task 2. Click Edit button 3. Change tasks Priority and Required quantity to string (letters)	Both fields should remain empty and Save button should be disabled
7.6	Edit tasks Task description	1. Select task 2. Click Edit button 3. Type long string into Task description field 4. Click Save button 5. Open tasks Details	Task description should appear in tasks Details window
7.7	Edit tasks Attributes	1. Select task 2. Click Edit button 3. Click Attributes tab 4. Edit attribute 5. Click Save button 6. Open tasks Details 7. Open Attributes tab	Attribiute value should be changed

TOUR

Scope: User's tour for Proccess control
Action: Shows user step by step examplary Proccess control functionality

#	Action
1	User logs in
2	User adds new parameter in parameters configuration
3	User adds new control action in control actions configuration with created parameter assigned
4	User adds new control in controls configuration with created control action assigned